Again: Natpython/Vocola and DNS9.1 does not start in-sync
Submitted by udo on Mon, 07/09/2007 - 20:46.
Hello,
I still have the problem mentioned in
Topic: Vocola and DNS9.1
Forum: Extensions » Vocola
I'm using Vocola with DNS 9.1 SP1 but have the problem that Vocola and DNS not start in-sync - that means I must press the numeric + some times until the Python Macro Message-Window is shown (and Vocola macros are recognized). I have that problem on my Desktop and Notebook but never before with DNS 8 and 7.
As Quintijn wrote it's Natpython which doesn't start.
That problem is really nasty. I must switch off and on the mic some times, or say "Edit global commmands" one or more times. Any additional hint?
Thanks and greetings
Udo
I use vocola for my English
I use vocola for my English speech profiles for some time now. It only starts after a microphone toggle. Natpython is active at that time already.
Quintijn (NatSpeak 9.1 SP1)
Vocola 2.5.7 should not
Vocola 2.5.7 should not require a microphone toggle to start. Have you had a chance to try it yet?
Udo, unfortunately, I don't
Udo,
unfortunately, I don't have a solution, but I do report the same problem w/ DNS 9.1 Pro.
Sounds like your starting in QuickStart mode
Try going to the DNS shortcut in your "Start Menu">>"All Programs">>"StartUp" Folder. Right-click and select properties. Remove the /Quick from the end of the Target: value. You might also want to try just telling it to automatically load your user profile. To do that after the last quote add /user ""